Description

simulation Metal Stainless steel Oil cylinder For 1/14 Tamiya RC Truck car dump truck diy parts Toys Color: black silver Quantity: 1 piece material: metal Suitable for 1/14 Tamiya RC Truck car 4-section cylinder size: (Retracted state) 125MM (Extended state) 410MM 5-section cylinder size: (Retracted state) 125MM (Extended state) 460MM Precautions for first use: Exhaust is required. The specific method is to connect the oil cylinder and the oil pump (the M5 threaded hole is the oil inlet end). The oil pump and the oil tank are well connected. Be sure to ensure that the oil pipe joint connection position does not leak. The oil tank is filled with oil, which must be greater than the volume of the multi-stage oil cylinder. When the oil cylinder is raised to the top using remote control, the oil pump will reverse after working for about 3 seconds under load. If the oil cylinder shakes or does not move when it falls back, it means there is a large amount of oil. Air, slowly press it back by hand, and lift it again. When lifting, please apply an external force to make the cylinder load move. After reaching the top, the oil pump reverses after working for about 3 seconds under load. Keep repeating this action until the cylinder can come down smoothly or only a small amount of gravity can be applied to come down. (It takes about 20-25 times to exhaust air through our sample test)